The best camera mounts can secure a monitor, position a camera on a desk or bar, or add grip and accessory points to a cage. Choose by the support you need, your camera or monitor’s mounting interface, and whether the setup stays stationary or moves with you.
Quick Top Products
SmallRig Camera Mount C Stand
- Adjusts from 19 to 39 inches with the ball head and C-clamp attached.
- Ball head offers 360° rotation and -90°/+45° tilt.
- C-clamp fits tables up to 1.85 inches thick.
Best For: Desk-based streaming, interviews, and overhead or eye-level setups that need adjustable height.
SmallRig Cool Ballhead Arm 1138
- The clamp and dual ball head use a 1/4"-20 screw for compatible gear.
- Supports up to 1.5kg.
- Includes an action-camera mount adapter.
Best For: Mounting a small camera or accessory to a desk edge, tube, or frame.
SmallRig 9.8-Inch Magic Arm Clamp Kit
- The articulating arm measures 9.8 inches.
- The clamp jaw opens from 15mm to 54mm.
- The arm uses 1/4" screws at both ends.
Best For: Positioning a monitor, light, or microphone away from a clamp point on a rig or support.
SmallRig 11-Inch Magic Arm Clamp 5311
- The kit combines an 11-inch arm and crab-shaped clamp.
- Retractable pins and a 1/4"-20 screw help prevent twisting.
- The maximum payload is 1.5kg.
Best For: Vlogging or studio filming when you need a longer arm with a clamped base.
SmallRig 7-Inch Magic Arm Clamp 5310
- The kit has a 7-inch arm and crab-shaped clamp.
- The 1/4"-20 screw has retractable pins.
- The maximum payload is 1.5kg.
Best For: A more compact clamped magic arm for action cameras, monitors, and lights.
SmallRig Magic Arm Clamp Kit
- The rotating triangular prism friction block is designed for flat surfaces and tubes.
- One knob adjusts the device position.
- The recommended load capacity is 1.5kg.
Best For: Clamping a small camera or accessory to a desk edge, tube, or tripod support.
SmallRig Super Clamp Mount with GoPro Adapter
- The kit includes a removable action-camera adapter.
- It accepts rods from 14mm to 60mm in diameter.
- The maximum load capacity is 3.5kg.
Best For: Action-camera users who want a removable adapter and a clamp for larger supports.
SmallRig Field Monitor Mount BSE2346
- It mounts through a cold shoe and suits 5- and 7-inch monitors.
- The holder swivels 360° and tilts 140°.
- It supports monitors up to 1.2kg.
Best For: Attaching a 5- or 7-inch field monitor to a camera cold shoe.
SmallRig Adjustable Monitor Mount 6314
- The bottom uses a 3/8"-16 locating screw for ARRI.
- It supports horizontal and vertical installations.
- It provides 360° pan and 180° tilt.
Best For: Mounting a monitor to an ARRI locating point for landscape or portrait framing.
SmallRig Camera Monitor Mount 6313
- The base slides into a cold or hot shoe and locks in place.
- It offers 180° tilt and 360° pan.
- The bottom also has a 1/4"-20 threaded hole.
Best For: Quickly adding a compatible monitor to a cold shoe for horizontal or vertical framing.
Adjustable Tabletop Stand
SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod
This tabletop stand gives a desk setup more reach than a short clamp arm. Its three-section pole adjusts from 19 to 39 inches with the ball head and C-clamp attached, and the head provides 360° rotation plus -90°/+45° tilt.
A detachable ball head accepts another device with a 1/4"-20 threaded hole. The C-clamp fits tables up to 1.85 inches thick, so check your desk edge before choosing it.
At 15 ounces, the stand is designed to be portable, though its extended height and desk-clamp format suit stationary setups better than compact handheld rigs.
Best For: Desk-based streaming, interviews, and overhead or eye-level setups that need adjustable height.
| Pros | Cons |
|---|---|
|
|
Choose this stand when you need a tall, adjustable desk mount for a camera, phone, or ring light. Its ball head covers substantial angle adjustment, and the detachable head adds flexibility.
Before buying, measure the desk edge and confirm the mounting thread on your device. The record gives a maximum load capacity of 3kg but does not tie that figure to pole extension, so check whether your planned setup falls within the intended configuration.
Compact Clamp for Rods and Desks
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The 1138 pairs a super clamp with a dual ball head and a 1/4"-20 screw, making it a compact way to position a small camera, monitor, light, or microphone. Its clamp can attach to a rod, tube, table, frame, or tripod without drilling.
The notes give a maximum supported load of 1.5kg and describe an anti-twist structure with non-slip threads. An action-camera adapter is included.
For a moving setup, the notes advise using a safety rope; the clamp's usefulness therefore depends on choosing a secure attachment point and keeping the rig within its load limit.
Best For: Mounting a small camera or accessory to a desk edge, tube, or frame.
| Pros | Cons |
|---|---|
|
|
This compact clamp is a practical pick for small cameras and accessories when you can attach it to a rod, tube, or desk. Its supplied action-camera adapter widens the use beyond the 1/4"-20 screw.
The 1.5kg limit makes load planning important, especially with an extended accessory combination. Check the attachment surface and use a safety rope for dynamic filming, as the notes specifically call for one in those situations.
Long Reach with Double Ball Heads
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This kit combines a super clamp with a 9.8-inch articulating arm, giving accessories more reach than a clamp-mounted ball head alone. The arm has 1/4" screws at both ends and double ball heads that rotate 360°, while the clamp includes 1/4" and 3/8" threads.
Its jaw opens from 15mm to 54mm, and rubber cushions help protect clamped surfaces and tighten the grip. The aluminum-alloy and stainless-steel construction suits rigging accessories such as monitors, lights, and microphones.
It is not corrosion-resistant, so seawater use is specifically ruled out.
Best For: Positioning a monitor, light, or microphone away from a clamp point on a rig or support.
| Pros | Cons |
|---|---|
|
|
Choose this kit when the accessory needs to sit away from its clamp point, such as a monitor positioned beside a camera rig. The arm's 9.8-inch reach and 360° ball-head adjustment give it more positioning range than a compact single-head clamp.
Check that your mounting point falls within the 15mm-to-54mm jaw range and that the accessory has a compatible 1/4" connection. Keep it away from seawater because corrosion resistance is not provided.
11-Inch Anti-Twist Magic Arm
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 5311 combines an 11-inch magic arm and crab-shaped clamp for positioning an action camera, monitor, light, or microphone. Retractable pins beside the 1/4"-20 screw help resist device twisting, and a knurled thumbscrew provides tool-free fastening, with an Allen-wrench hole for extra tightening.
Its clamp fits tubes, tables, tripod legs, and stabilizer rings from 15 to 40mm in diameter. The stated maximum payload is 1.5kg.
The arm's longer reach helps with framing, but it also makes careful load and attachment-point checks especially relevant.
Best For: Vlogging or studio filming when you need a longer arm with a clamped base.
| Pros | Cons |
|---|---|
|
|
This arm suits creators who need more reach for a small monitor or action camera and want an anti-twist connection. It gives you a broad range of positioning, with all joints loosened or locked using one wingnut.
The 1.5kg payload applies to the assembled mount, so include the accessory and any attached gear when checking the load. Confirm the support diameter is within the clamp's stated 15-to-40mm range.
Short-Reach Magic Arm Clamp
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
The 5310 is a compact magic arm with a crab-shaped clamp. It has a 1/4"-20 screw and retractable pins at one end to help prevent an attached device from twisting.
The clamp fits tubes, tables, tripod legs, or stabilizer rings from 15 to 40mm in diameter and includes anti-slip pads. A wingnut loosens or locks all arm joints together.
With a maximum payload of 1.5kg, this mount is aimed at compact accessories rather than heavier camera builds. Check both the support diameter and accessory load before attaching it.
Best For: A more compact clamped magic arm for action cameras, monitors, and lights.
| Pros | Cons |
|---|---|
|
|
Pick the 5310 when you want a clamped, anti-twist setup in a compact package. Its 7-inch arm can make sense when the camera or accessory should stay closer to its support.
The supported load is 1.5kg, so this is for modest accessories. Verify the clamp can fit your tube or support and that the device has a compatible 1/4"-20 mounting point.
Friction-Grip Clamp Kit
SMALLRIG Magic Arm Clamp Kit, Camera Mount Friction Arm with Super Clamp
This kit pairs a magic arm with a super clamp designed to grip both flat surfaces and round tubes. A flexible rotating triangular prism friction block is intended to improve contact on a table edge, while the clamp also fits round supports such as tripods and handheld rings.
One knob adjusts the accessory position, and the recommended load capacity is 1.5kg. The kit includes an action-camera mount and has cushions on both the clamp and arm head.
Its one-knob adjustment keeps setup simple, but make sure the surface and device weight suit the stated capacity.
Best For: Clamping a small camera or accessory to a desk edge, tube, or tripod support.
| Pros | Cons |
|---|---|
|
|
Choose this kit if a flat desk edge is your main mounting point and the rotating friction block matches its shape. It also accommodates round tubes and includes an action-camera mount, offering a flexible small-rig setup.
The recommended 1.5kg capacity is the key limit to check against your camera and attached gear. Since the jaw range is not provided, confirm the actual support fits before buying.
Broad-Range GoPro Clamp Mount
SMALLRIG Super Clamp Mount, Ballhead Magic Arm and Adapter for Gopro
This super clamp kit is designed around action cameras, with a removable GoPro adapter and threaded connections for other equipment. It accepts rods from 14mm to 60mm in diameter and surfaces up to 65mm thick, providing a broader stated attachment range than several compact clamp arms here.
A 360° adjustable ball head helps position the camera, while a hex hole supports added fastening. The maximum load is 3.5kg.
Check which action-camera cage the adapter fits and measure your intended support before purchase, especially if you plan to attach anything beyond a compact camera.
Best For: Action-camera users who want a removable adapter and a clamp for larger supports.
| Pros | Cons |
|---|---|
|
|
This is a versatile choice for action-camera users who need to clamp onto thicker surfaces or a wide range of rods. The removable adapter and 1/4"-20 and 3/8"-16 threads also make it useful for other compact gear.
Its stated 3.5kg load capacity is higher than some options in this roundup, but verify your exact accessory interface and support dimensions before using it.
Cold-Shoe Field Monitor Holder
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
This holder is purpose-built for field monitors, connecting to a camera or other support through a cold shoe adapter. It suits 5- and 7-inch monitors and offers 360° horizontal swivel with 140° vertical tilt for reframing the display.
A bottom 1/4-20 screw secures the monitor, and rubber cushions help improve friction and protect it from scratches. The CNC-machined aluminum mount supports monitors weighing up to 1.2kg.
Check that your camera or rig has a cold shoe where the monitor can sit without interfering with other equipment.
Best For: Attaching a 5- or 7-inch field monitor to a camera cold shoe.
| Pros | Cons |
|---|---|
|
|
Choose this holder when a field monitor is the main accessory and your camera or rig provides a cold shoe. Its 140° tilt and 360° swivel allow a useful range of viewing positions, while the 1.2kg capacity sets a clear monitor-weight limit.
Check the shoe location and monitor's 1/4-20 connection before buying; its interface differs from the ARRI-style monitor mounts in this roundup.
Portrait-and-Landscape ARRI Monitor Mount
SMALLRIG Adjustable Camera Monitor Mount with 3/8"-16 Locating Screw for ARRI, 360° Swivel and 180° Tilt, Anti-Twist 1/4" Locating Screw, Horizontal & Vertical Shooting
The 6314 is a dedicated monitor mount for a camera cage, top handle, or other support with a 3/8"-16 ARRI locating point. Its top uses a retractable 1/4"-20 locating screw and locating pins, with a silicone pad to reduce monitor twisting and scratching.
It supports horizontal and vertical installations, then provides 360° pan and 180° tilt for positioning. The tilt damping is adjustable using a thumb knob.
Check that your rig has the specified ARRI locating hole and that your monitor offers a compatible 1/4"-20 threaded or locating hole before choosing it.
Best For: Mounting a monitor to an ARRI locating point for landscape or portrait framing.
| Pros | Cons |
|---|---|
|
|
This mount fits a rig already built around ARRI locating points and a monitor with the compatible top interface. Its portrait-and-landscape capability is useful when switching video orientation, and adjustable damping gives control over tilt.
Confirm both mounting interfaces and check the monitor's weight before buying, since no maximum load is provided in the product details.
Cold-Shoe Monitor Mount with Damping
SMALLRIG Camera Monitor Mount with Cold Shoe, 180° Tilt and 360° Swivel, Retractable 1/4" Locating Screw Anti-Twist, Damping Adjust, Horizontal & Vertical Shooting
The 6313 combines a cold-shoe base with a retractable 1/4"-20 locating screw and pins for an anti-twist monitor connection. It pans 360° and tilts 180°, and its tilt damping can be adjusted with a thumb knob to suit different device weights.
The base also has a 1/4"-20 threaded hole for connecting another accessory such as a magic arm. This gives it more interface flexibility than a cold-shoe-only mount.
Check that your monitor can use the top connection and that the camera's shoe placement allows the desired viewing angle.
Best For: Quickly adding a compatible monitor to a cold shoe for horizontal or vertical framing.
| Pros | Cons |
|---|---|
|
|
Pick the 6313 for a monitor setup that needs quick shoe mounting plus wide pan and tilt adjustment. Its bottom 1/4"-20 thread gives another way to build it into a rig, and the adjustable damping can accommodate different device weights without a stated numeric limit.
Confirm the monitor's top connection and the camera-side shoe or thread you plan to use. If weight matters, check the mount's capacity before purchase.
How to Choose Camera Mounts
How We Picked Camera Mounts
We prioritized products that directly support a camera, field monitor, or common video accessory, then compared how they attach: desk clamps, rod and tube clamps, cold shoes, and ARRI locating points serve different rigs. The selection includes complete clamp-and-arm kits, a height-adjustable tabletop stand, and dedicated monitor holders so readers can match the mount to a filming setup.
We also considered stated load limits, adjustment range, supported attachment sizes, and useful anti-twist or surface-protection features. Camera cages, battery holders, rod blocks, and handgrips can help build a broader rig, but they do a narrower job than these direct mounting options.
Comparing Camera Mounts for Your Rig
For a fixed desk setup, the SmallRig C stand offers a 19-to-39-inch height range and fits tables up to 1.85 inches thick. Compact clamps such as the 1138 attach to rods or tables, while the 9.8-inch kit extends an accessory away from the clamp point.
The 11-inch and 7-inch magic arms share a 1.5kg payload and 15-to-40mm clamp range; pick reach based on where the accessory needs to sit.
For action cameras and larger supports, the GoPro adapter clamp accepts rods from 14mm to 60mm or surfaces up to 65mm thick. Monitor mounts depend more on interface: the BSE2346 uses a cold shoe and supports monitors up to 1.2kg; the 6314 uses an ARRI locating connection; and the 6313 uses a shoe base with a 1/4"-20 threaded option.
Confirm both ends of the connection before buying.
| Product | Standout features | Best for |
|---|---|---|
| SmallRig Camera Mount C StandCheck Price |
| Desk-based streaming, interviews, and overhead or eye-level setups that need adjustable height. |
| SmallRig Cool Ballhead Arm 1138Check Price |
| Mounting a small camera or accessory to a desk edge, tube, or frame. |
| SmallRig 9.8-Inch Magic Arm Clamp KitCheck Price |
| Positioning a monitor, light, or microphone away from a clamp point on a rig or support. |
| SmallRig 11-Inch Magic Arm Clamp 5311Check Price |
| Vlogging or studio filming when you need a longer arm with a clamped base. |
| SmallRig 7-Inch Magic Arm Clamp 5310Check Price |
| A more compact clamped magic arm for action cameras, monitors, and lights. |
| SmallRig Magic Arm Clamp KitCheck Price |
| Clamping a small camera or accessory to a desk edge, tube, or tripod support. |
| SmallRig Super Clamp Mount with GoPro AdapterCheck Price |
| Action-camera users who want a removable adapter and a clamp for larger supports. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Attaching a 5- or 7-inch field monitor to a camera cold shoe. |
| SmallRig Adjustable Monitor Mount 6314Check Price |
| Mounting a monitor to an ARRI locating point for landscape or portrait framing. |
| SmallRig Camera Monitor Mount 6313Check Price |
| Quickly adding a compatible monitor to a cold shoe for horizontal or vertical framing. |
Match the Clamp to the Support
Measure the surface or tube where the camera mount will attach. A stated jaw capacity is useful only if it matches the actual desk edge, tripod leg, handlebar, or rail.
For a desk rig, check the C stand's 1.85-inch table limit. For the 11-inch or 7-inch arm, confirm the support is within its 15-to-40mm diameter range.
For the broad-range GoPro clamp, distinguish the 14-to-60mm rod range from its 65mm maximum surface thickness.
Protective pads and friction blocks can improve contact and help avoid scratches, but surface shape still matters. A rotating block can suit a flat edge, while a padded crab clamp can grip a tube.
For moving footage, keep the full assembly within the stated load guidance and use a safety rope where advised.
Choosing a Monitor Mount for Camera Cages
Start at the camera side: a cold shoe is quick to attach, while an ARRI locating point is intended for a compatible cage or handle. Then check the monitor side for its threaded or locating holes.
The BSE2346 is specifically suited to 5- and 7-inch monitors and gives 360° swivel and 140° tilt. The 6314 and 6313 add portrait-orientation support and 180° tilt, but their mounting interfaces differ.
For a monitor that needs frequent angle changes, look for a thumb-operated adjustment and damping control. Also check the maximum supported weight where one is supplied.
The BSE2346 lists up to 1.2kg; the two newer mounts do not provide a maximum monitor weight in their product details, so verify capacity for your display before use.
Which Camera Mount Fits Your Setup?
Choose the C stand for an adjustable desk position, the compact 1138 for a simple clamp point, or the 9.8-inch, 11-inch, or 7-inch arm when you need to place an accessory farther from its support. The GoPro adapter clamp suits action-camera users who need a broad rod or surface range.
For field monitors, choose by the camera-side shoe or ARRI connection and the display's mounting interface.
Before purchase, check support dimensions, the device's thread or shoe, and the complete rig's weight. Those details determine whether the mount fits your camera workflow and whether its angle range and reach will be useful.